The installation distance between the 1.2 mm atomization nozzles in the irrigation nozzle is maintained at 1.5 meters, and the installation distance between the irrigation nozzles is also 1.5 meters; the installation of the large flow rate of 1.8 mm and 2 mm in the irrigation nozzle is long-d... read more
The micro-sprinkler belt is a micro-sprinkler irrigation product that uses a laser to directly perforate the belt-shaped plastic hose for irrigation. Micro spray belts are widely used in field crops, greenhouse vegetables, flower nurseries, etc. The use of micro spray belts: vegetables, mushrooms, n... read more
The drip irrigation pipe is an important irrigator in the drip irrigation system. According to the water requirements of the crop, the water and the nutrients needed by the crop are dripped evenly and slowly into the crop through the low-pressure pipe system and the irrigator installed on the capill... read more
1. Regardless of the main water pipe or the water distribution pipe, the distance between the plastic pipe and the surrounding walls is kept at about 80 cm. The variable diameter tee or variable diameter valve is used to connect the main water pipe and the water distribution pipe, and only o... read more
The form and classification of green sprinkler irrigation nozzles: The combination of green sprinkler irrigation nozzles is mainly based on a variety of factors such as terrain and wind, which can usually be divided into rectangular combined forms and triangular combined forms. The form and classifi... read more