The sprinkler irrigation system is a water conservancy […]
The sprinkler irrigation system is a water conservancy facility that takes water from the water source, transports it, and distributes it to the field to implement sprinkler irrigation. It consists of three parts: water source engineering, water transmission and distribution channels or pipelines, and spraying equipment.
Sprinkler irrigation nozzles are used to disperse water into droplets, which are more evenly sprayed on the planting area like rainfall. Sprinkler arrangement steps for closed boundary sprinkler irrigation area; first arrange the sprinklers at the turning point of the boundary, and then arrange the sprinklers at a predetermined interval on the boundary of the turning point, and the spacing of the sprinklers is required to be as equal as possible. Then, arrange the sprinklers in the area between the boundaries. For sprinklers, the density of sprinklers is required to be as equal as possible.
Arrangement principles are arranged at equal intervals and equal density to meet the requirements of sprinkler irrigation uniformity to the greatest extent. It is required that there is no large amount of water splashing outside the sprinkler irrigation area when there is no wind or breeze. It is necessary to fully consider the influence of wind on the most distribution of sprinkler irrigation water, and strive to minimize this influence. Fully consider the impact of greenery plants on the spraying effect.
There are still situations in our minds when people woke up very early every year to drain water and dig reservoirs to store water. With the development of agricultural technology, modern agriculture has gradually been automated to this day. From all kinds of seeding, The harvesting machinery uses agricultural sprinklers to fertilize and water.
The use of agricultural sprinklers makes farmers more labor-saving and water-saving. There are also many ways to work with sprinklers. Let’s learn about agricultural sprinklers. Rocker-arm sprinklers are often used in support sprinkler irrigation. The sprinklers are made of aluminum alloy and plastic. There are two kinds of materials, and the performance of plastic material is better.